99 GSR Sway Bar install on a 95 hatchback

559EG6 · 07-28-2010, 02:55 PM

almost done with the brake conversion and wanted to install the GSR Rear Sway Bar but obviously there are no holes to mount, do i need to fab new one or is there a kit out there that makes it easy. any help and pictures of the same set up or similar would be appreciated.

grey goose · 07-28-2010, 05:45 PM

heres my car with an jdm itr 23mm spec swaybar. also a 95 civic hatchback.
Mine already had drilled holes that lined up correctly because my chassis is an Si.
I think you might have to fab your own holes T____T

559EG6 · 07-28-2010, 06:59 PM

thanks for the info and niiice set up probably close to the same thing i am going to do.

jdm93eg6 · 07-28-2010, 08:09 PM

http://importnut.net/swaybar.htm

maybe this link will help

d-mon · 07-29-2010, 07:29 AM

you need 94-01 integra lcs and endlinks for a 5th gen civic.

finished:

mine are for sale, i have a 6th gen now.

solchild93 · 07-29-2010, 07:39 AM

grey goose is right the si chassis already have the holes ... i got the same sway and almost same set up.

here's mine.